Nikon os Speedlight SB-102 User Manual
Mikon
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Table of contents
Document Outline
- Mikon
- Speedlight
- NOMENCLATURE
- FOREWORD
- PREPARATION
- TIPS ON SPEEDLIGHT CARE
- BASIC OPERATIONS
- To remove
- A4 Insert the joint plate ■ into the joint collar®.
- AO Lock the joint.
- 40 Loosen the joint " lever ®.
- A A Insert the arm ® into the joint.
- 4C Position the arm.
- 4 A Lock the arm.
- 26 Set the ASA/ISO film speed.
- 27. Set the shutter ■ speed on the camera.
- [HrH**
- 28B. Non-TTL Automatic ' Operation.
- 29 Turn on the flash unit.
- Wait for the ready- light® to light.
- 04 Take the picture.
- 02 Turn off the flash unit.
- Bracket @
- Arm ®
- Joint
- Close-Up Shooting in the Non-TTL Automatic Mode
- Synchro Socket (D
- Sensor Socket @
- Sensor UnitSU-101 (Optional)
- Synchronization Speed
- Shooting Mode Selector ®
- Exposure Calculation Dial
- Non-TTL Automatic Flash Control
- Manual Flash Control
- Ready-Light
- Warning Function: Beyond Auto Shooting Range
- Test Firing
- Wide-Flash Adapter SW-102 (D
- Target-Light Function
- Replacing the Target-Light
- Multiple Flash Photography
- Daylight Fill-In Flash Photography
- TIPS ON SPEEDLIGHT PHOTOGRAPHY.
- OPTIMUM BATTERY PERFORMANCE
- ACCESSORIES
- ACCESSORIES —continued.
- SPECIFICATIONS
- Speedlight