Nortel Networks NN44470-100 - Manual (Page 55)

- 55 -
Nortel MAS Console
Nortel Media Application Server 6.0 for AS 5300
Fundamentals
NN44470-100 01.01 Standard
Release 6.0 03 June 2008
Copyright © 2008, Nortel Networks
Digit relay configuration
The following figure shows an example of a Configure Digit Relay dialog box.
Configure Digit Relay dialog box
The following table describes the Configure Digit Relay dialog box fields and
buttons.
Default Rates Select the default frame rate for each enabled
video codec.
Preferred Format Select the preferred format for each enabled video
codec.
Annex Profile Select the annex profile for each enabled video
codec.
Restart Required This is a read-only field. It indicates whether a
restart of the server is required if you modify the
trusted node host name or IP address. Values are
Yes and No. Yes indicates a platform restart is
required for the configuration change to take effect.
OK Click OK to close the dialog box.
Cancel Click Cancel to close the dialog box without saving
changes.
Field Description
(2 of 2)