Netopia 3387W-ENT - Manual (Page 22)

5-2 Getting Started Guide
reconfiguring the manner in which you may be using the router to connect to more than one ser vice
provider or remote site.
• The System Configuration menus display and permit changing:
• IP Setup
• Filter Sets
• IP Address Ser ving
• Network Address Translation (NAT)
• Date and Time
• SNMP (Simple Network Management Protocol)
• Security
• Upgrade Feature Set
• Change Device to a Bridge
• Logging
• The Utilities & Diagnostics menus provide a selection of seven tools for monitoring and diagnosing the
router's behavior, as well as for updating the firmware and rebooting the system.
• The Statistics & Logs menus display nine sets of tables and device logs that show information about your
router, your network, and their histor y.
• The Quick Menus screen is a shor tcut entr y point to 22 of the most commonly used configuration menus
that are accessed through the other menu entr y points.
• The Quick View menu displays at a glance current real-time operating information about your router.
Connecting through a Telnet Session
Features of the Netopia 3387W-ENT can be configured through the Telnet screens.
Before you can access the Telnet screens, you must have:
• A network connection locally to the router or IP access to the router.
• Telnet software installed on the computer you will use to configure the router
Configuring Telnet software
If you are configuring your router using a Telnet session, your computer must be running a Telnet software
program.