Nextar MP907 - Manual (Page 16)

Playback Function
Scanning forward and backward
During playback, press the Forward or Backward button to:
Reverse direction
Forward direction
Returning to the previous chapter or track DVDs, Video CDs and CDs.
Press the Previous button during playback.
When pressed, playback returns to the beginning of the previous chapter or track.
Moving ahead to the next chapter or track DVDs, video CDs and CDs
Press the Next button during playback.
When pressed once, playback moves forward to the next chapter or track.
Removing discs
1. Press the STOP button
2. Press release lock of player
3. Press the disc cover release lock
4. Remove the disc
Note:
With CDs or one-sided DVDs, you do not have to worry about touching the label (printed)
side or the disc with your fingers. Two-sided DVDs, however, have signals recorded on both
sides, so be careful not to scratch them when removing them from the player.
Turning Off the Power
1. When the power is on, press and hold down for about 2 seconds
The power indicator becomes red and the power is set to off
The power can also be set to standby mode by pressing the power button on the remote control.
2. Unplug the power cord from the power outlet.
3. Disconnect the AC adapter from the player’s DC input jack.
Setting for connecting TV
When connecting the player to an external TV monitor, please make sure that (for better
audio and visual performance) you can press MENU/SYSTEM SETUP/TV SYSTEM, then
you can choose NTSC or PAL in below menu picture.
29 30