Send an emergency alarm – Nikon XTS 5000 User Manual

Page 31

Advertising
background image

ASTRO XTS 5000 Model I

21

Common Radio Features

Send an Emergency Alarm

An emergency alarm sends a data transmission to the dispatcher,
which identifies the radio sending the emergency.

1

With your radio turned on,
press the Emergency
button. The red LED lights,
and you hear a short,
medium-pitched tone.

• Red LED
• Short tone

Note: To exit emergency at any time, press and hold the

Emergency button for about a second.

2

When you receive the
dispatcher’s
acknowledgment, you hear
four tones, the alarm ends,
and the radio exits the
emergency mode.

If no acknowledgment is
received, the alarm ends and
the radio exits the emer-
gency mode.

• Four tones
• Alarm ends
• Radio exits emergency

• Alarm ends
• Radio exits emergency

Note: For Emergency Alarm with Emergency Call: The radio

enters the Emergency Call state either after it receives the
dispatcher’s acknowledgment, or if you press the PTT button
while in Emergency Alarm. Go to step 2 of “Send an
Emergency Call” on page 22.

94C25-G_XTS5000Mdl1.book Page 21 Tuesday, May 6, 2008 6:09 PM

Advertising