NEC PlasmaSync 50MP2 - Manual (Page 23)

16
Showing a couple of pictures on the
screen at the same time
* An RGB-input picture may not be displayed in these modes,
depending on the input signal specifications.
1. Press the MULTI button to select a screen mode from
among single mode, side by side, and picture in picture.
Side by side
VIDEO1 RGB/PC1
A B
Note:
Picture A and B on the above screen are not always of the
same height.
Picture in picture
VIDEO1
Sub
screen
Main screen
RGB/PC1
MULTI SCREEN Operations
Operations in the Side-by-side mode
To change the picture size, press the cursor ᮤ or ᮣ button.
VIDEO1 RGB/PC1
A
B
VIDEO1 RGB/PC1
A B
VIDEO1 RGB/PC1
B
A
To swap the picture on the right and the left, press the
cursor
ᮡ button.
VIDEO1 RGB/PC1
A B
VIDEO1 RGB/PC1
B A
To make the desired picture active, press the SELECT
button.
VIDEO1 RGB/PC1
A B
VIDEO1 RGB/PC1
A B
ᮤ button ᮣ button
ᮤ button
ᮣ
button
ᮡ button
SELECT
button
Information
Multi screen operations may not function depending
on the combination of input signals. In the table below,
“
ࠗ” means Yes, “ן” means No.
Ⅵ Multi screen operations may not function
depending on the type of the RGB signals.
VIDEO1
VIDEO2
VIDEO3
HD/DVD1
HD/DVD2
RGB/PC1
RGB/PC2
RGB/PC3
VIDEO1
ן
ן
ן
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
VIDEO2
ן
ן
ן
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
VIDEO3
ן
ן
ן
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
HD/DVD1
ࠗ
ࠗ
ࠗ
ן
ࠗ
ࠗ
ࠗ
ࠗ
HD/DVD2
ࠗ
ࠗ
ࠗ
ࠗ
ן
ࠗ
ן
ࠗ
RGB/PC1
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ן
ן
ן
RGB/PC2
ࠗ
ࠗ
ࠗ
ࠗ
ן
ן
ן
ן
RGB/PC3
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ן
ן
ן Pictures
displayed on
the left/sub
screen
Pictures displayed on the right/main screen