Lifebreath 4TONDHW(T) - Manual (Page 21)

Top
Side Front
29.5"
29.5" 19"
47.5"
6"
6"
®
C L E A N A I R F U R N A C E
14"
12"
4"
19"
22.25"
Duct (coil)
Opening
17.25"
Ventilation
Supply Air
Inlet
Ventilation
Exhaust Air
Outlet
22"
Return
Plenum
Latches
Blower Section
(SERVICE CLEARANCE 1') (SERVICE CLEARANCE 3')
Note: Ventilation ports and return
plenum opening available
off either side of cabinet.
All units conform to CSA
and UL Standards.
Options
99-186 Weatherhoods, Two - 6" c/w
1/4" mesh screen
99-130W Remote Wall Mount Dehumidistat
Control 24 VAC only
99-RSK6 6” back draft damper
Specifications
Model 4TONVENTAC
(No Heating Coil)
Core Ventilation system has patented aluminum heat recovery core (standard) or an enthalpic energy
recovery core (optional) for energy-efficient ventilation. Enthalpic cores are recommended for
regions where the temperature does not drop below 25˚F (-4˚C).
Filters Washable air filters in exhaust and supply air streams of ventilation section, 1" pleated in
return plenum side.
Case Prepainted galvanized steel for superior corrosion resistance.
Dimensions & Clearances
21
Model 4TONVENTAC
Voltage 120 VAC 60 Hz
Hp 1/3
Amps (total) 7.7
* Airflow (High)
.25 in wg 1888 CFM
.5 in. wg 1589 CFM
Ventilation 100 - 140 CFM
Airflow
Effectiveness 70%
(Aluminum Core)
Total Efficiency 50%
(Enthalpic Core)
Net Weight 132 lbs.
Shipping Weight 147 lbs.
* Airflow performance assumes an evaporator
coil static pressure loss of .25” WC.
Warranty
Units carry a lifetime warranty on the heat
recovery (aluminum) core, a five year warranty
on the energy recovery (enthalpic) core and a
five year replacement parts warranty on all
other components.
0105