Newcon Optik BINOCULAR SIB 16X40 WP - Manual (Page 2)

IMPORTANT INFORMATION
Read prior to activation
You have just purchased a complicated electronic device. To
operate it properly, please read this manual carefully. Here are
some common precautions that must be noted.
• NEVER switch to the stabilization mode while the power
supply control indicator is not glowing or less than 1 minute
after activating the unit
• NEVER hit the unit while operating or being transported
• NEVER transport the unit without the case
• NEVER disassemble the unit. This device contains high
speed rotating parts, which may be hazardous to you!
• NEVER turn off the unit while stabilizing mode is on
• NEVER reverse the polarity of the batteries
• ALWAYS remove batteries when not in use for a long
period
• ALWAYS keep the objective lenses covered when not in
use
• ALWAYS store in a warm dry place when not in use
2
10. QUALITY CERTIFICATE
The SIB 16x40 WP has passed the quality inspection.
Production date ____________________________
Serial number ______________________________
Quality Inspector signature _____________________
Purchase date ______________________________
Salesman _________________________________
Quality assurance seal