Netac Tech Co. Ltd. - Manual (Page 8)

iMuve
9 10
3. Basic Operations
3.1 Battery
: The battery is full.
: The battery is exhausted. Screen would prompt “Low power, please recharge” about
5 seconds and power off automatically when the battery is extremely low.
P200 powered by lithium battery. Please connect P200 to adapter for charging, or
connect car adapter with cigar-lighter adapter of car to charge for the battery. When
the battery is charging, the LED is red, and green represents finished charge.
1) Windows 98/98SE: Unplug P200 from USB port of the computer after stop
transferring.
2) Windows Me/2000/XP/Server 2003 (Windows 2000 e.g.): Click the icon at the
taskbar, then click the “Stop USB Mass Storage Device - Driver”, and click “OK”
button in the pop-up window “The ‘ USB Mass Storage Device’ device can now be
safely removed from the system”, then you can unplug P200 from the computer
safely.
Please connect the car adapter to cigar-lighter adapter of car, please refer to the
figure. Netac Technology Co., Ltd. is not responsible for any loss arising out of using
this cigar-lighter adapter of car.
3) Mac OS 9.0 or above (Mac OS 10.3.2 e.g.): Select the icon(s) representing P200,
and click “File” to select “Exit NO NAME” or “Exit” (if SD/MMC card is plugged into
P200), then you can disconnect P200 from the computer.
Tips: Please drag P200 icon into Trash, then unplug it on Mac OS 9.0.
4) Linux 2.4.x or above: Input the command “umount /mnt” before unplugging P200.
The “/mnt” directory is corresponding with the “/mnt” mentioned above.
Cigar-lighter adapter of car