NAD C715 - Manual (Page 23)

AMPLIFIER SECTION
Power output Stereo Mode 25W (6 ohms within rated distortion, 1khz)
IhF dynamic power (6 ohms) 28W
Total harmonic distortion at rated power 0.15%
Damping factor (6 ohms) >102
Input sensitivity and impedance (Tape IN) 370mV/27kΩ
Frequency response +1 db/-3db (Ref. 1 khz, 10hz – 80khz)
Signal/noise ratio, 95db (Ref. rated power/ 6 ohms A-WTD)
Signal/noise ratio 80db (Ref. 1W / 6 ohms A-WTD)
TUNER SECTION
AM SECTION
Tuning range 520khz - 1710khz (North America version, 10khz steps)
522khz -1629khz (Europe version, 9khz steps)
Usable sensitivity 60dbuV
S/N ratio 40db
Total harmonic Distortion 1.5%
Selectivity 25db
Frequency response -6db (Ref. 400hz, 80hz – 2.2khz)
FM SECTION
Tuning range 87.50Mhz – 108Mhz (50khz steps)
Usable sensitivity, MoNo 10dbuV
S/N Ratio MoNo 60db
S/N Ratio STEREo 55db
Total harmonic Distortion, MoNo 0.3%
Total harmonic Distortion, STEREo 0.5%
Frequency response -3db (Ref. 1 khz, 30hz – 12khz)
Channel Separation 35db
RDS decode sensitivity 29dbuV
CD SECTION
output level 1.16V
Frequency response (ref. 0db 1khz, 20hz-20khz) +1db
Total harmonic distortion (ref. 1khz, VIDEo oUT) 0.04%
Signal/Noise ratio (A-weighted, ref. 1khz VIDEo oUT) 100db
Channel balance (ref. 0db 1khz) 0.5db
Dynamic range (A-WTD, VIDEo oUT) 82db
Channel separation 78db (1khz)
78db (10khz)
PHYSICAL SPECIFICATIONS
Dimensions (W x h x D) 213 x 103 x 324 mm (Net)
213 x 116 x 362 mm (Gross)
Net weight 4.5kg
Shipping weight 6.0kg
Note: Gross dimensions include feet, extended buttons and rear panel terminals.
Specifications are subject to change without notice. For updated documentation and features, please log onto www.NADelectronics.com for the latest
information about C 715.
REFERENCE
SPECIFICATIONS

EN
G
LI
SH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ