Nike + IPOD - Manual (Page 19)

19
To link to a remote:
1 Connect the receiver to an iPod nano.
2 Choose Nike + iPod > Settings > Remote > Link, and follow the onscreen instructions.
To turn remote functionality on or off for iPod nano:
Choose Nike + iPod > Settings > Remote, and set Remote to On or Off.
m
To unlink a remote from iPod nano:
Choose Nike + iPod > Settings > Remote > Unlink, and follow the onscreen
m
instructions.
Linking to Another Sensor
You can use your iPod nano or your iPod touch with more than one Nike + iPod Sensor.
You may want to do this, for example, if there’s more than one person in your family
with a sensor and Nike+ ready shoes. Each time you use an iPod with a different sensor,
you must link to that sensor.
If you connect an iPod nano external receiver to a different iPod and use it with the
same sensor, the receiver remembers your settings, your workout history, and your
workout shortcuts. You don’t need to relink or recalibrate.
To link to another sensor:
1 iPod nano: Connect the receiver to an iPod.
2 Put on the shoes with the new sensor, and make sure there is no other Nike + iPod
Sensor nearby.
Walk around to activate the sensor so your receiver (internal or external) can detect it.