Newcon Optik LAM 10M IR - Manual (Page 16)

13
6. Maintenance, storage and
transportation
6.1. General
LAM is a sophisticated precise optical instrument equipped
with electronics. Therefore, it should be handled with due
care.
- Never disassemble LAM.
- Keep away from direct sunlight, impacts, dust, moisture,
and sharp changes of temperature.
- Do not keep LAM at temperatures higher than 60 o C
(140 o F). Keep away from heating appliances and central
heating.
- Do not touch the optical surfaces with fingers. Doing so
may damage the anti-reflection coating.
- Avoid shocks and sharp jolts.
- Clean optical surfaces only with professional camera lens
cleaning supplies.
- Use soft clean cloth to wipe the exterior of LAM.
- Remove battery when storing for long period of time.
- All repairs must be performed by an authorized service.
- If LAM was exposed to salt water it should be rinsed in
fresh water and dried on air at no more than 60
o C.