Eizo TX D7 - Manual (Page 6)

6
PRECAUTIONS
• Use the enclosed power cord. If using the power cord
other than the enclosed one, use the following cord.
In USA and Canada:
* Rating: min. 125 V, 10 A * Length: max. 2.1 m
* Type: SVT
* Plug type:NEMA 5-15P, Parallel blade, Grounding type, 125
V, 10 A
In Europe:
* Rating: min. 250 V, 10 A * Length: max. 2.1 m
* Type: H05VV-F 3G 1 mm 2
Use a plug type approved by the country where you use.
Failure to do so may cause fire or electric shock.
• Do not overload your power circuit, as this may result in
fire or electric shock.
• For proper connections of the power cord, be certain to
plug the power cord to the provided monitor connector and
directly to a wall outlet.
By not doing so may result in fire or electric shock.
• Handle the power cord with care.
* Do not place the cord underneath the monitor or other heavy
objects.
* Do not pull on the cord.
* Do not attempt to repair a damaged cord.
If the power cord becomes damaged, stop using it. Use of a
damaged cord may result in fire or electric shock.
• To disconnect the power cord, grasp the plug firmly and
pull.
Never tug on the cord, doing so may cause damage and could
result in fire or electric shock.
CAUTION
Be careful when taking the monitor out of the carton:
• Disconnect the power cord, signal cables and remove the
optional i·Sound д д д д д sound unit and i·Station д д д д д USB hub (if
applicable) when moving the monitor.
Moving the monitor with the cord attached or lifting it by the
i·Sound
sound unit or i·Station USB hub is dangerous. It may
result in injury or equipment damage.
OK