Nokia MD-5W - Manual (Page 6)

6
1. Ensure that the speakers are off
and that the phone is on.
2. Press and hold the power key
until the blue and red indicator
lights start to alternate.
3. Activate the Bluetooth feature
on the phone, and set it to
search for Bluetooth devices.
4. Select the speakers from the list
of found devices.
5. Enter the Bluetooth passcode
0000 to pair and connect the
speakers to the phone. In some
phones you may need to make
the connection separately after
pairing.
If the pairing is successful, the blue
indicator light flashes five times,
and the speakers appear in the
phone menu where you can view
the paired Bluetooth devices.
Connect using a cable
You can connect the speakers to a
compatible device with the
supplied CA-63U cable.
To connect the speakers to a device
that has a 3.5-mm audio connector,
plug the cable into the audio input
on the speakers and the audio
connector on the device.
Basic use
Adjust the volume
To set the volume of the speakers,
press either volume key. If the
sound level of the speakers
becomes too low when using
battery power, change the
batteries.
Listen to music
To listen to music, connect the
speakers to a compatible music