Nokia 3205 - Manual (Page 61)

S e t t i n g s ( M e n u 4 )
Copyright © 2004 Nokia. All rights reserved. 61
1. At the standby screen, select
Menu > Settings > Network
services > Call divert and press
Select .
2. Select one of the following
options:
Divert all calls — Divert all calls
to the number you specify.
Divert if busy — Divert incoming
calls when you are in a call.
Divert if not answered — Divert
incoming calls to another
number if you are unable to
answer. You can set a delay
before diverting takes place.
Divert if out of reach — Divert
incoming calls when your phone
is off.
Cancel all call divert — Cancel
any call diverting options you
have set.
3. Scroll to Activate and press
Select .
4. Scroll to the destination to which
your calls will be diverted and
press
Select .
5. Enter the number to which your
voice calls will be diverted and
press
OK .
Cancel
At the standby screen, select Menu
> Settings > Network services >
Call divert > Cancel all call diverts
and press Select .
Note: Cancel all call diverts
may affect your ability to
receive voice mail messages.
Contact your wireless
provider for specific details.
Store a feature code
1. At the standby screen, select
Menu > Settings > Network
services > Network feature
setting and press Select .
2. Enter the feature code from your
service provider (for example,
*900 for activating
Divert if
busy ) and press OK .
3. Press Select when Call divert is
displayed.
4. Scroll to the type of diverting
that matches the feature code
you entered (for example,
Divert
if busy ), press Select , then press
Activate .
The activated feature code is now
stored in your phone, and you are
returned to the
Feature code:
field. Continue entering other
feature codes (for example, *900
to cancel
Divert if busy ), or press
the End key to return to the
standby screen.
Note: Once you enter a
network feature code
successfully the feature
becomes visible in the
Network services menu.