Eizo CG210 User Manual
Page 31
[To unlock]
Switch off the monitor's power by the power button on the front control panel, then
hold Down the Auto Adjustment button once again and turn the power back on.
Off Timer
The off timer function causes the monitor to automatically enter a power off state after
a predetermined amount of time has lapsed. This function was created to reduce
afterimage characteristics that are particular to LCD monitors when the monitor screen
is left on for a long period without use.
[Procedure]
(1) Select <Off Timer> in the ScreenManager <Others> menu.
(2) Select "Enable" and press the Right and Left buttons to adjust the "On
Period" (1 to 23 hours).
[Off Timer System]
PC
Monitor
Power Indicator
On Period (1H - 23H)
Operation
Blue
Last 15 min. in "On
period"
Advance Notice
*1
Blue Flashing
"On period" expired
Power off
Flashing yellow slowly
*1 Advance notice (Power Indicator flashing blue) will be given 15 minutes before
the monitor automatically enters the "Power Off" mode.
Pressing the power button during the advanced notice period can reset "On
Period" for another 90 minutes. It is possible to reset "On Period" as many times
as needed.
[Power Resumption Procedure]
Press the power button to return a normal screen.