NordicTrack NTTL90081 - Manual (Page 17)

17
6. SYMPTOM: THE DISPLAYS OF THE CONSOLE DO NOT FUNCTION PROPERLY
a. Remove the key and unplug the power cord. Remove the
screws from the hood. Carefully remove the hood. Locate the
Reed Switch (74) and the Magnet (95) on the left side of the
Pulley (17). Turn the Pulley until the Magnet is aligned with the
Reed Switch. Make sure that there is a 1/8Ógap between the
Magnet and the Reed Switch. If necessary, loosen the Screw
(90) and move the Reed Switch slightly. Retighten the Screw.
Re-attach the hood, and run the treadmill for a few minutes to
check for a correct speed reading.
95
74
90
Top
View
1/8У
17