Nokia BH-903 - Manual (Page 18)

G e t s t a r t e d
18 © 2008 Nokia. All rights reserved.
■ Display
When the headset is on but not used for about 10 seconds,
the display goes to the power saving mode. In this mode,
the display turns off for about 5 seconds and turns on for
about 1 second at regular intervals.
To activate the display when it is in the power saving mode,
press any key.
To activate the display and keys if the keys are locked,
briefly press the power key. See also
“Lock or unlock the
keys,” p. 22 .
The following indicators can be shown on the display:
The headset is connected to a compatible device
and ready for use.
The headset is not connected to a compatible
device.
A call is in progress.
A call is active and another call is on hold.