Reference, 1. attaching an arm, Attaching an arm – Eizo COLOREDGE CG301W User Manual

Page 24

Advertising
background image



5. Reference

. Reference

-1. Attaching an Arm

The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the
LCD monitor.

NOTE

• When attaching an arm or stand, follow the instructions of their user’s manual.
• When using another manufacturer’s arm or stand, confirm the following in advance and select one

conforming to the VESA standard. Use M4 × 12 mm screws supplied with the monitor.

- Clearance between the screw holes: 100 mm × 100 mm
- Thickness of plate: 2.6 mm
- Strong enough to support weight of the monitor unit (except the stand) and attachments such as

cables.

• Attach an arm or stand to meet the following tilt angles of the monitor.– Up 45 degrees, down 45

degrees (Within operating range)

• Connect the cables after attaching an arm.

Setup Procedure

1

Lay the LCD monitor on a soft cloth spread over on a stable surface with the
panel surface facing down.

2

Remove the stand. (Prepare a screwdriver.)

Unscrew the four screws securing the unit and the stand with the screwdriver.

3

Attach the monitor to the arm or stand.

Secure the stand to the monitor with four screws using a screwdriver.

Advertising