Navigon 92 PREMIUM - Manual (Page 24)

User’s manual NAVIGON 92 Plus | 92 Premium
- 24 - Voice Command
Note: The Voice Command function is not available in every language.
For languages in which this function is not available, the Voice
Command button is not shown in the N
AVIGATION
window.
Many functions of your navigation device can be called up conveniently
by voice command.
6.1 Activating the voice commands function
The voice commands function is automatically active in many windows.
This applies in particular to windows in which you are expected to
provide an answer, for example when there is a new traffic message
concerning your route.
On the map in
Standard or Navigation mode, the Voice Command
function will be activated as soon as the button bar is shown.
►
Tap on any point on the map.
You will hear a single acknowledgement tone and you can utter
your command.
6.2 Use Voice Command
When the functions in a window can be called up by voice command,
this is indicated in the bottom left corner of the window by the symbol
( Voice command active).
A single signal tone and the symbol ( Speak) indicate that the
navigation system is waiting for your voice command.
►
Say a command.
The positive acknowledgement tone sounds (two high-pitch tones)
and the function is executed.
If the navigation system has not understood your instruction or if you do
not say anything within a certain time, the negative acknowledgement
tone (two short low-pitch tones) will sound.
►
Say the command again.
If the navigation system has not understood you after several
repetitions, the prompt "Say Help" will appear.
Note: Navigation instructions and warnings are muted for as long as the
navigation device expects to receive voice commands from you.