NETGEAR ETHERNET SWITCH SW108 - Manual (Page 32)

Installation Guide for the Model SW108 Ethernet Switch
B-2 Connector Pin Assignments
Table B-1 lists the pin assignments for the RJ-45 plug and the vista RJ-45 connector.
* Applicable to port1 on the Model SW108 switch, when the Normal/Uplink push button is
in the Uplink position.
Table B-1. RJ-45 plug and vista RJ-45 connector
pin assignments
Pin Normal assignment Uplink assignment*
1 Input Receive Data + Output Transmit Data +
2 Input Receive Data – Output Transmit Data –
3 Output Transmit Data + Input Receive Data +
6 Output Transmit Data – Input Receive Data –
4, 5, 7, 8 Internal termination, not used for data transmission
SW108.BK Page 2 Friday, June 27, 1997 10:48 AM