Nextar MD1008 - Manual (Page 4)

ITEM# MD1008
UNDERSTANDING THE LCD
Warning
• Please cut off the power right away and go to your local authorized repair
service when water or other objects or liquids enter into the machine. If you
do not cut the power immediately this may lead to electric shock and/or fire.
• Please cut off the power right away and go to your local authorized repair
service if smoke or a peculiar burning smell occurs. Failing to do so will lead
to system errors.
• Please do not remove the back cover of the LCD. If exposed it is important
to know you are at risk of being electrically shocked. Always inquire at your
local authorized repair service to perform any inspection, adjustment, and
repairs.
Adjusting Light on the LCD
Be advised the adjustment for angles and a clear LCD maybe limited by design.
You can adjust for a clearer picture by adjusting the lightness of the screen.
When you first use this machine please adjust the LCD for viewing in the
furthest position.
Control LCD
• The temperature of the LCD may become high if exposed to direct sunlight
for long periods of time, resulting in damages to the unit. Please put the
machine in safe keep while not using.
• LCD should work with in the following temperatures:
Working temperature area from 32 degrees F (0 Celsius) to 140º F (60º Celsius)
If above or below the temperatures listed the LCD may not function properly.
• Do not touch the LCD, as it may become dirty or damaged.
• Please note that putting anything between the LCD and its docking station
will prevent the unit from functioning properly.
3