NISSAN R35-D - Manual (Page 280)

Black plate (275,1)
Model "R35-D" EDITED: 2008/ 5/ 20
2. Fit the jack head into the dent
*
A of the
jack-up point by turning the jackscrew
clockwise with your fingers.
3. Loosen each wheel nut one or two turns by
turning counterclockwise with the wheel nut
wrench. Do not remove the wheel nuts
until the tire is off the ground.
4. Carefully raise the vehicle until the tire clears
the ground. To lift the vehicle, securely hold
the jack lever and rod with both hands as
shown above.
Maintenance and do-it-yourself 8-41