National Geographic NG1050 - Manual (Page 5)

5
ENGLISH
NG1050
• Press the date button to display the calendar in the right corner of the photo.
To copy the photo from your memory card to the internal memory in thumbnail mode:
•
Select the desired photo screen by using the up , down , left and right button. The
selected photo is highlighted with a red frame.
• Press the copy button .
• Press the enter button to confirm or the escape button to leave without copying the photo.
To delete the photo in thumbnail mode:
•
Select the desired photo screen by using the up , down , left and right button. The
selected photo is highlighted with a red frame.
• Press the delete button .
• Press the enter button to confirm or the escape button to leave without deleting the photo.
NOTE
According to the size of the photos, it may take time to go to the previous or the next photos, so be patient
when using these functions. When you use the original mode, according the dimensions of the photos, some
black strips may occur on the left and right side of the screen. It may also happen that higher and lower parts
of the screen can be cropped while original pictures are adjusted to the screen.
The recommended working time continuously for your digital photo frame is maximum 10-12 hours.
9.2 Clock mode
Once you confirmed the clock mode, the clock and alarm settings menu is displayed.
5 different settings can be changed:
– Date (year / month / day)
– Time (hour / minutes / seconds)
– Alarm time
– Auto on time
– Auto off time
Once the Auto On/Off time is set, the photo frame will automatically switch on at the set auto on time and switch
to stand-by again after the set Auto off time.
• Press the up and down button on remote control to select the item you want to change.
• Press the enter button to confirm.
• Press the left and right button to move the curser.
• Press the up and down button to change the value.
• Press the escape button to leave the setting
9.3 Music mode
Once you confirmed music mode, the stored music on the internal memory or the installed memory card will be
displayed.
• Press the up and down button to select the song you would like to play.
• Press the play/pause button to start playing the song.
• Press the play mode button to switch between
• Press the volume up or down button to change the volume.
• Press the skip forward button to play the next song.
• Press the skip backward button to play the previous button.
• Press the play/pause button to pause playing.
• Press the play/pause button again to continue playing.
• Press the stop button to stop playing.
• Press the menu button to display the main menu.
While the music is playing, you can start the slide show of the pictures stored on the same memory card.
Press the slide button
on the remote control.
9.4 Setting mode
Once you confirmed setting mode, a list of settings is displayed.
• Press the up and down button to select one of the next settings:
DATE DATE 12
31 27 28 18
COPY COPY
15
ENTER ENTER
29 ESC ESC 30
31 27 28 18
DEL DEL
26
ENTER ENTER
29 ESC ESC 30
31 27
ENTER ENTER
29
28 18
31 27
ESC ESC 30
31 27
21
20
VOL+ VOL+ 16 VOL VOL 17
23
24
21
21
21
MENU MENU 13
SLIDE SLIDE 30
31 27