Nokia CR-102 - Manual (Page 6)

ENGLISH
Mount the mobile holder
To attach a compatible Nokia mobile holder to the mounting plate,
use the screw supplied with the holder.
To use the CR-102 mobile holder, remove the protection plate with
the Nokia text from the holder, use a screwdriver to attach the holder
to the mounting plate with the supplied screw, and replace the
protection plate (7). To insert your mobile device into the holder, push
the catch at the top of the holder (8), and slide the device into the
holder until it locks into place (9). To remove the device, push the
catch (10), and pull the device out (11).