NordicTrack NTEVEL59011 - Manual (Page 23)

23
Inspect and tighten all parts of the elliptical crosstrainer
regularly. Replace any worn parts immediately.
For smooth
operation of
the elliptical
crosstrainer,
the incline
frame should
be kept clean.
Using a soft
cloth and mild
detergent,
clean dust and
other residue
from the incline
frame where
the wheels make contact with it. Other parts of the
elliptical crosstrainer can also be cleaned in this way.
Never use abrasives or solvents.
To prevent damage to the console, keep liquids away
from the console. Always remove the batteries from
the console when storing the elliptical crosstrainer.
BATTERY REPLACEMENT
If the letters LO appear in the console display, the
batteries should be checked. Refer to assembly step 5
on page 7 to find the location of the battery compart-
ment. Remove one of the batteries and then re-insert it.
If the letters LO continue to appear in the display,
replace the batteries.
LUBRICATING THE INCLINE BRACKET
The incline
bracket and the
indicated bolt
should be regu-
larly lubricated.
Apply a small
amount of the
included lubri-
cant to the bolt
and between the
bracket and the
upright.
HOW TO LEVEL THE ELLIPTICAL CROSSTRAINER
If the elliptical
crosstrainer rocks
slightly during
use, turn one or
both of the
Levelling feet
under the rear
Stabiliser until
the rocking
motion is elimi-
nated.
MAINTENANCE AND TROUBLESHOOTING
Incline
Frame
Bolt
Upright
Wheel
Incline
Bracket
Levelling
Feet