Nokia 9207219 - Manual (Page 16)

B a s i c u s e
16
■ Attach a strap
1. Remove the battery cover. For
details, see “Insert the battery,”
p. 10.
2. Thread a strap through the hole
at the top of the receiver so
that the loop runs around the
small pin. Tighten the strap.
3. Replace the cover.
■ Clear settings or reset
To clear all the pairing settings from the receiver, press and
hold the power key (for about 10 seconds) until the battery
charge indicator light alternates between red and green.
To reset the receiver if it stops functioning, even though it is
charged, remove the battery.