Nokia SGH-D830 - Manual (Page 69)

M
enu funct
io
ns
Me
ss
ages
(M
en
u 5
)
67
- Connect to POP3 server first/
Connect to IMAP4 server first:
connect to the POP3 or IMAP4 server
before connecting to the SMTP server
to send e-mails.
- Protocol type: select the protocol for
the incoming e-mail server. The
remaining options depend on the
protocol type setting.
When the protocol type is POP3:
- POP3 server: enter the IP address or
host name of the server that receives
your e-mail.
- POP3 port: enter the POP3 port
number.
- User ID: enter the POP3 user name.
- Password: enter the POP3 password.
- Use SMTP authentication: enable
SMTP authentication, which requires
the user to login before sending
e-mails.
- Same as POP3: select if you want the
SMTP server to have the same
parameters as the POP3 server.
- SMTP user ID: enter the SMTP user
name.
- SMTP password: enter the SMTP
password.
- APOP login: connect to the server by
using the APOP login scheme.
- Email retrieval limit(1-100): set the
number of headers you will retrieve
from the server.
- Secure connection: use a secure
connection for the e-mail service.
When the protocol type is IMAP4:
- IMAP4 server: enter the IP address or
host name of the server that receives
your e-mail.
- IMAP4 port: enter the IMAP4 port
number.
- User ID: enter the IMAP4 user name.
- Password: enter the IMAP4 password.
- Use SMTP authentication: enable
SMTP authentication, which requires
the user to login before sending
e-mails.