NEC LCD1504M - Manual (Page 32)

Specifications
Monitor LCD
Specifications Monitor
LCD Module Diagonal: 15.0 inch Active matrix; thin film transistor (TFT)
Viewable Image Size: 15.0 inch liquid crystal display (LCD); 0.297 mm dot
Native Resolution (Pixel Count): 1024 x 768 pitch .
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync TTL Level (Positive/Negative)
Horizontal sync Positive/Negative
Vertical sync Positive/Negative
Display Colors Analog input: 16,194,277 Depending on display card used.
Synchronization Horizontal: 31.5 kHz to 61 kHz Automatically
Range Vertical: 55 Hz to 76 Hz Automatically
Resolutions Supported 720 x 400* 1 :VGA text Some systems may not support
640 x 480* 1 at 60 Hz to 75 Hz all modes listed.
800 x 600* 1 at 56 Hz to 75 Hz
832 x 624* 1 at 75 Hz
1024 x 768 at 60 Hz to 75 Hz ..................
recommended resolution at 75 Hz for
optimal display performance.
Active Display Area Horizontal : 304.1 mm/12.0 inches
Vertical : 228.1 mm/9.0 inches
Power Supply 100 -240 V ~50/60 Hz
Current Rating 0.5 - 0.3 A/100-240V
Dimensions 344.6 mm (W) x 352.7 mm (H) x 165 mm (D)
13.6 inches (W) x 13.9 inches (H) x 6.5 inches (D)
Weight 3.2 kg
7.1 lbs
Environmental Considerations
Operating Temperature: 5 °C to 35°C/41°F to 95°F
Humidity: 10% to 80%
Feet: 0 to 10,000 Feet
Storage Temperature: -10 °C to 60°C/14°F to 140°F
Humidity: 10% to 85%
Feet: 0 to 40,000 Feet
* 1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying nonnative resolutions full screen. In flat panel technologies, each
dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.
NEC DISPLAY SOL UTIONS
30
Notes
Maximum Left/right: 60 °/60° (CR>10)
Viewing Angles Up/Down: 45 °/45° (CR>10)
–continued