Nuvo V1360A - Manual (Page 9)

Nuvo Video Display Systems – User Manual
To Select a Video Signal for Display at a Monitor Using the Optional Wall
Control
NOTE:
This section applies only to systems with the optional video switching.
NOTE:
The Wall Control Panel is an optional feature and may not be included in the system. Identical
functionality is available from the button, if provided, on the monitor’s sterilizable handle.
1. Determine whether Monitor A or Monitor B is to be switched.
2. Go to the Wall Control, where the bottom panel is dedicated to video switching. Press the
associated button (to the left of the panel for Monitor A, to the right for Monitor B)
repeatedly until the desired image appears on the monitor.
NOTE:
For systems which have a single video source, there is no need for switching and the wall control
panel is not provided.
NOTE:
The video channel selected for display is indicated by one of the four blue LED indicators
associated with that monitor on the panel. If fewer than 4 video inputs are provided, or if
any monitor does not have a video source connected to it, the monitor will show a blank
image when the associated channel is selected.
M2Z00167 Page 9