Nokia 5070 - Manual (Page 63)

63 Copyright © 2006 Nokia. All rights reserved.
Select Always online to set the phone to automatically connect to an packet data network when it is switched
on. indicates a packet data connection.
Modem settings
You can connect the phone using an IR or a data cable (CA-42) connection to a compatible PC, and use the
phone as a modem to enable packet data connectivity from the PC.
To define the settings for connections from the PC, select Menu > Settings > Connectivity > Packet data >
Packet data settings > Active access point , activate the access point you want to use, and select Edit active
access point . Select Alias for access point , and enter a nickname for the currently selected access point. Select
Packet data access point , and enter the access point name (APN) to establish a connection to an EGPRS
network.
You can also set the dial-up service settings (access point name) on your PC using the Nokia Modem Options
software. See
Nokia PC Suite p. 97 . If you have set the settings both on the PC and on your phone, the PC
settings are used.
■ Enhancements
This menu is shown only if the phone is or has been connected to a compatible mobile enhancement.
Select Menu > Settings > Enhancements . You can select an enhancement menu if the corresponding
enhancement is, or has been, connected to the phone. Depending on the enhancement, select from the
following options:
Default profile — to select the profile that you want to be automatically activated when you connect to the
selected enhancement
Automatic answer — to set the phone to answer an incoming call automatically after 5 seconds. If Incoming
call alert is set to Beep once or Off , automatic answer is off.
Lights — to set the lights permanently On . Select Automatic to set the lights on for 15 seconds after a keypress.
Text phone > Use text phone > Yes — to use the text phone settings instead of headset or loopset settings