Nokia CK-10 - Manual (Page 13)

I n s t a l l a t i o n
13
English
Some vehicles do not come with such a possibility. In this case the car kit
can be connected to the positive terminal of the 12-V car battery using the
2-A fuse supplied. If the car kit is installed in this way, it stays in service as
long as a compatible mobile phone remains in the phone holder.
Note: Replace a blown fuse with a fuse of the same type and size.
Never use a fuse with a higher rating.
System cables CA-46 and CA-47
Two system cables are provided for connection of the hands-free unit with a
compatible mobile phone, depending on whether the car kit is used with a
phone holder or connected directly to the mobile phone.
Connect the system cable CA-46 to active phone holders with a Pop-PortTM
connector and the system cable CA-47 to passive phone holders.
■ Functional test
After you have installed your car kit, it needs to be checked to ensure that it is
working properly. When testing the operation of the equipment, also check
that it is mounted so that it does not impair the driver during operation of the
vehicle.
9236521_CK-10_1_en.fm Page 13 Wednesday, November 3, 2004 5:18 PM