NEC LT265 User Manual
Page 13
Advertising
6
1. Introduction
Monaural Speaker (2W)
AC Input
Connect the supplied power cable's
three-pin plug here, and plug the other
end into an active wall outlet.
(See page
Main Power Switch
When you plug the supplied power cable into an active wall
outlet and turn on the Main Power switch, the POWER
indicator turns orange and the projector is in standby mode.
(See page
Remote Sensor
PC Card Slot
Rear Foot
Ventilation (outlet)
Lamp cover screw
Rear Foot
Rotate to make the projector level.
(See page
PC Card Eject Button
Lamp cover
(See page
Advertising