NETGEAR Universal WiFi Range Extender WN3000RP - Manual (Page 5)

Getting Started
5
Universal WiFi Range Extender WN3000RP
Hardware Features
WPS
Ethernet port
Factory Reset button
WPS button
Device On/Off button
PC to Extender
Status
Link Rate
Note: For best performance,
position antennas pointing up.
Figure 1. Extender
The LEDs on the front show how the Extender is working:
•
WPS. This LED indicates a WPS wireless connection.
- Solid green . There is wireless security (WPA or WPA2).
- Blinking green
. A WPS connection is in progress.
• PC to Extender. The LED is lit when the Extender is connected to a PC.
•
Status. This LED is lit when the Extender is powered on.
• Link Rate . This LED indicates a wireless connection between the Extender and the
router.
- Green is best.
- Amber is good.
- Red is poor.
The side panel has the following features:
• Ethernet port . You can use this for a wired connection to a computer or other device as
described in the User Manual.
• Factory Reset button . To use this button, stick a paper clip into the reset hole and hold it
until the Status LED flashes.
•
WPS button. Press the WPS button to wirelessly connect the Extender to your
router or wireless adapter.
• Device On/Off button . Turns the device on and off.