NARDA 8718B - Manual (Page 102)

101 Chapter 18 User's Software
18
User’s Software
Description
The 8718B User’s Software is a Windows™ - based program that
performs three basic functions:
• Probe Calibration Data. The User's Software is used to
enter probe calibration information into the memory of
the Model 8718B.
• Data Retrieval. The User’s Software is used to download
data collected with the Model 8718B with one of its three
data logging modes.
• Diagnostics and Upgrades. The User’s Software is used
to provide meter diagnostics and to load firmware
updates into the meter.
The User’s Software for the Model 8718B is supplied on a
compact disk. It should be permanently installed on the hard
drive of a personal computer.
System Requirements
In order to install and operate the User’s Software successfully,
your system must meet the following minimum requirements:
• An IBM or 100% compatible personal computer with
4 MB of RAM.
• 1 MB of hard drive space.
• Microsoft Windows™3.1, Windows™95, Windows™98,
Windows™NT or later.
• A printer supported by Microsoft Windows
(required for printing reports).
• A CD ROM drive.
• A mouse.
• A cable to connect the computer to the 8718B (supplied).