NextBase Gallery 15 User Manual

Page 11

Advertising
background image

General Introdu ction

10

CONNECT TO THE 8'' X 6'' FRAME

CONNECT TO THE 10'' X 8'' FRAME USING THE FRAME MOUNT

Nextbase Gallery 15 can match with all standard 8'' X 6'' wooden frames as shown below:

1. Match the standard 8'' X 6'' frame with Gallery 15.
2. Move the locking latches upon the frame to secure the Gallery 15 in place.
3. If the chosen frame does not have its own locking latches, then use the meta l connectors built

in to the Gallery 15 for this purpose . Withdraw the metal connectors on shown below. Attach to
the fram e using screws supplied.

Your Nextbase Gallery 15 can match with all standard 10'' X 8'' wooden frames by

contained in the a ccessories:

using the Frame

Mount

Slide out both sides

Note: Rem ote control is not possible if the sensor is blocked by the frame.

PDF 文件使用 "pdfFactory Pro" 试用版本创建

www.fineprint.cn

Advertising