NETGEAR N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
Page 62
62
|
Chapter 6. USB Storage
N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
You can use this screen to specify access to the USB storage device. The settings are as
follows:
•
Network Device Name
. The default is readyshare. This is the name used to access the
USB device connected to the wireless router from your computer.
•
Workgroup
. If you are using a Windows workgroup rather than a domain, the workgroup
name is displayed here.
Access Method
•
Network Connection
. Enabled by default, this allows all users on the LAN to have
access to the USB drive.
•
HTTP
. Disabled by default. If you enable this setting, you can type http://readyshare to
access the USB drive.
•
HTTP (via Internet)
. Disabled by default. If you enable this settings, remote users can
type http://readyshare to access the USB drive over the Internet.
•
FTP
. Disabled by default.
•
FTP (via Internet)
. Disabled by default. If you enable this settings, remote users can
access the USB drive via FTP over the Internet.
Available Network Folders
•
Folder Name
. Full path of the network folder.
•
Volume Name
. Volume name from the storage device (either USB drive or HDD).
•
Total Free Space
. The space currently available on the storage device.
•
Share Name
. You can click the name shown, or you can type it into the address field of
your Web browser. If Not Shared is shown, then the default share has been deleted and
no other share for the root folder exists. Click the link to change this setting.
•
Read/Write Access
. Shows the permissions and access controls on the Network folder.
Selecting All-no password allows all users to access the network folder. You are
prompted to enter the same password that you use to log in to the wireless router.