Lan port (local ports), Wireless port, Show statistics – NETGEAR N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual

Page 54

Advertising
background image

54

|

Chapter 5. Network Maintenance

N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual

LAN Port (Local Ports)

MAC Address

. The wireless router LAN port Ethernet MAC address.

IP Address

. The wireless router LAN port IP address. The default is 192.168.1.1.

DHCP

. If Off, the wireless router does not assign IP addresses to PCs on the LAN. If On, the

wireless router does assign IP addresses to PCs on the LAN.

IP Subnet Mask

. The IP subnet mask used by the wireless router LAN. The default is

255.255.255.0.

Wireless Port

See

Wireless Settings Screen

on page

29 for a more detailed description of these settings.

Name (SSID)

. The Wi-Fi network name (SSID) for the wireless network. The default for a or n

operation is NETGEAR-5G. The default for b or g operation is NETGEAR.

Region

. The country where the unit is set up for use.

Channel

. The current channel, which determines the operating frequency.

Mode

. The current Mbps setting.

Wireless AP

. Indicates if the access point feature is enabled. If disabled, the Wireless LED

on the front panel is off.

Broadcast Name

. Indicates if the wireless router is configured to broadcast its SSID.

Wi-Fi Protected Setup b/g/n

. This indicates whether Wi-Fi Protected Setup is configured for

the b/g/n network.

Wi-Fi Protected Setup a/n

. Indicates whether Wi-Fi Protected Setup is configured for the a/n

network.

Show Statistics

Click the Show Statistics button on the Router Status screen to display a screen similar to
this:

Advertising
This manual is related to the following products: