Connecting the scanner, 1 before connection – Nikon AX-110 User Manual
Page 26
Advertising
16
Nikon
ScanTouch 110 User's Manual
4. Connecting the Scanner
4.1
Before Connection
Before connecting the cables, confirm that all devices, including the
computer system and the scanner, are turned off.
Power OFF
For an IBM PC/AT or compatible in which a SCSI board has not been
installed, install a SCSI board as explained in the manual supplied with
the board.
Note:
Make sure that the PC is powered off before installing the SCSI
board.
When installing a SCSI board for the first time, be careful not to set
conflicting I/O addresses, interrupt numbers, or graphic board DMA
channels.
4. Connecting the Scanner
Advertising