Nostalgia Electrics RFH-900 - Manual (Page 6)

ENGLISH
5
USING YOUR RETRO FERRIS WHEEL HOT DOG COOKER ™
First, find a stable surface near an electrical outlet before starting. Ferris wheel assembly must be engaged correctly
to operate properly. Confirm that the drip tray is in place when using the unit. Always make sure your cord is away from
any water source. If needed, it is acceptable to use an extension cord.
INSTRUCTIONS:
1. The button on the top of the unit turns the power on. When the button light is on, this indicates that the power is on
and the Ferris wheel will begin to turn. The arrow dial on the top right of The RETRO FERRIS WHEEL™ allows you
to adjust the temperature (see image below). To cook or warm foods, make sure the power is off and put the hot
dogs or food into the cages. You can double up as well. Turn power button on and the arrow on to HIGH. Watch the
food ride on the Ferris wheel as it cooks or keeps warm.
2. You will notice the color begin to darken as the hot dogs are cooking. The hot dogs should be cooked for about 20
minutes on high (depending on the type and size of the hot dogs). The thicker the hot dog, the longer it will take to
cook through. Once they are cooked to your desired taste, lower the temperature to go into warm mode and keep the
hot dogs toasty.
3. If you want to warm up your hot dog buns, simply open the bottom drawer (as shown below), and place your buns
into the drawer.
By following these simple instructions, your RETRO FERRIS WHEEL HOT DOG COOKER™ will be fun for friends,
family, and kids of all ages!
Power Temperature