NordicTrack ELITE 2900 0603.0 - Manual (Page 19)

19
HOW TO CREATE A RECORD PROGRAM
Insert the key into the console.
See HOW TO TURN ON THE POWER on page
13.
Personalize console settings if desired.
See HOW TO PERSONALIZE CONSOLE SET-
TINGS on page 13.
Select a Record program.
To select a Record program, press the Record
button once or twice.
If the Record program has not yet been de-
fined, the display will show a program time of
three minutes. If the program time is more than
three minutes, see HOW TO USE A RECORD
PROGRAM on page 20.
Each Record program is divided into one-minute
segments. One speed setting and one incline set-
ting can be programmed for each segment.
Press the Start button to start the program.
A moment after the button is pressed, the walking
belt will begin to move. Hold the handrails and
begin walking.
Select a display mode and program the
desired speed and incline settings.
When a Record program is selected, the console
offers three display modes. Press the Display but-
ton repeatedly to select the desired display mode.
To program a speed setting and an incline setting
for the first one-minute segment of the program,
simply adjust the speed and incline of the treadmill
as desired by pressing the Speed and Incline but-
tons.
When the first segment ends, a series of tones will
sound and the current speed setting and the cur-
rent incline setting will be saved in memory.
Program a speed setting and an incline setting for
the second segment as described above. Continue
programming speed and incline settings for up to
30 segments.
When you are finished with your workout, press
the Stop button twice. The Record program will
then be saved in memory.
When you are finished exercising, remove the
key from the console.
See step 8 on page 18.
6
5
4
3
2
1