NEC SIGMABLADE N8406-020 - Manual (Page 136)

- 136 -
Modifying or Deleting Zone Alias Information
The following describes modification or deletion of created zone alias information.
„ After modification by using a relevant command, confirm that the
modification is done normally by using the "alishow" command.
1. Register additional information to a zone alias.
Use the "aliadd" command.
Using the "aliadd" command allows additional information (including port information and WWPn) to
be registered in the specified zone alias additionally.
aliadd "aliname" , "member" <enter>
(1) (2)
(1) aliname:
Specify a zone alias name with it enclosed with double quotation marks (").
(2) member:
Specify a port and WWPn.
„ Delimit the zone name and the first additional information with a comma (,).
„ Delimit adjacent additional information with a semicolon (;).
2. Delete information from a zone alias.
Use the "aliremove" command.
Using the "aliremove" command allows registered information (including port information and
WWPn) specified from a zone alias specified to be deleted.
aliremove "aliname" , "member" <enter>
(1) (2)
(1) aliname:
Specify a zone alias name with it enclosed with double quotation marks (").
(2) member:
Specify the port and WWPn to be deleted.
„ Delimit the zone name and additional information with a comma (,).
„ Delimit adjacent information to be deleted with a semicolon (;).
3. Delete a zone alias created already.
Use the "alidelete" command.
Using the "alidelete" command allows a zone alias registered already to be deleted.
alidelete "aliname" <enter>
(1)
(1) aliname:
Specify a zone alias name with it enclosed with double quotation marks (").