Connecting the mediamaster, Connecting to the tv without scart, Common connections – Nokia 121 T User Manual

Page 8: Connecting to the tv with scart

Advertising
background image

GB 8

Connecting the Mediamaster

Connecting to the TV without SCART

• Remove the aerial lead from your TV and connect this to the TV

AERIAL input socket on the Mediamaster.

• Connect an RF cable from the TV/VCR output on the Mediamaster

to the RF input socket on the TV.

• Switch on your TV, plug in and switch on your Mediamaster.

• Select a programme number on the TV that is not currently used

for other TV channels.

• Follow the instructions in your TV manual to tune the TV to pick

up the First time installation menu.

• Follow the instructions in your TV manual to store this channel.

• When the First time installation menu is visible, press the ok

button on the Mediamaster’s remote control to start the instal-
lation procedure.

If the picture quality is bad you can later change the predefined UHF
channel 43 to any other figure between 21 and 69. You will also
have to tune your TV to the same (= the new) channel number.
Please see RF modulator output channel setting on page 15.

RF

Common connections

There are many different types of TV/VCR and other equipment that
you can connect to the Mediamaster.
In this section you will see some of the most common ways to con-
nect your equipment.

If you have problems with your connections and need help, contact
your retailer or Nokia Support.

Connecting to the TV with SCART

• Remove the aerial lead from your TV and connect this to the TV

AERIAL input socket on the Mediamaster.

• Connect a SCART cable between the main SCART socket on the TV

and the TV SCART socket on the Mediamaster.

• Connect an RF cable from the TV/VCR output on the Mediamaster

to the RF input socket on the TV.

• Switch on your TV, plug in and switch on your Mediamaster.

You may need to select the AV ( SCART ) channel on your TV to
watch Digital TV. In some cases your TV will automatically se-
lect this channel when the Mediamaster is switched on.

Note: The RF lead will need to be connected in order to watch
analogue channels ( your old 1,2,3,4,5 )

It is always advisable to consult your TV instruction book.

RF

SCART

Advertising