Nikon 5000 ED - Manual (Page 63)

54
4 Open the roller frame
Release the frame lock lever and open
the roller frame.
Opening the Roller Frame
Stop when resistance is felt. Attempting
to force the frame open past this point
could damage the adapter.
Caring for the SA-21 Strip-Film Adapter
Storage
When the adapter is removed from the scanner, store it in a well-ventilated area where the
temperature is between –10 °C (14 °F) and +50 °C (+122 °F) and the humidity less than 60%.
Do not store the adapter where it would be subject to sudden temperature changes or con-
densation.
Cleaning
The SA-21 is equipped with internal rollers for feeding and ejecting fi lm. Failure to keep the
rollers clean may result in frequent “jams” in which the scanner is unable to feed or eject
the fi lm. If jams are occurring more frequently, clean the interior of the adapter as described
below. Failure to observe this precaution could result in damaged fi lm.
1 Place the SA-21 on a level, stable surface
To prevent damage to the adapter, place the SA-21 on a level, stable surface during
cleaning.
2 Open the front panel
Press the release button and open the
front panel.
3 Remove the adapter cover
Release button
Front
panel
Adapter cover
Roller frame
Frame lock lever
Continuing Jams
If jams continue to occur frequently after the interior of the adapter has been cleaned, consult a Nikon
service representative.