Nady Systems MM4 - Manual (Page 9)

Input Jack (Phone) 8
Master Out Jack (Phone) 2
Effect • Post Fader (Phone) Send 2, Return 2
AUX Input Jack (Phone) 2
Headphone Jack (Phone) 1
Effect Sub in Jack (Phone) 2
Power S/W 1
CH Level S/W(0/-10/-20/MIC) 4
Effect Volume 4
PAN/BAL 4
CH Fader 4
Master Fader 1
Effect Return Volume 1
AUX In Volume 1
Headphone Volume 1
Peak Indicator (Input) 4
Peak Indicator (Output) 2
Power Indicator 1
In Case CH Level S/W is MIC 40Hz~50KHz + 0.5/-3dB
Except CH Level S/W is MIC 40Hz~50KHz + 0.5/-3dB
CH • 1 Level S/W (MIC) -124dBm
Master Fader (MIN) -98dBm Below
Master Fader (MAX)/All CH • Fader (MIN) -82dBm Below
Master Fader (MAX)/All CH • Fader (MAX)
CH Level S/W (-10)
-81dBm Below
Master Fader (MAX)/1 CH • Fader (MAX)
CH Level S/W (-10)
-80dBm Below
Less Than 0.05%
(50Hz~10KHz, +4dBm Output)
L • R • CH Less Than -70dBm(1KHz)
2.1 lbs (0.95kg)
8.6” x 8.6” x 2.4”
(218 x 218 x 61 mm)
3.7W, 12VDC/500mA adapter supplied
G E N E R A L S P E C I F I C AT I O N S
10
For improvement purposes, all specifications and design subject to change without notice.
REAR PANEL
TERMINAL
PANEL CONTROLS
LED INDICATORS
FREQUENCY
RESPONSE
INPUT NOISE LEVEL
RESIDUAL NOISE
WITH INPUTS
SHORTED
DISTORTION RATE
CROSS TALK
WEIGHT
DIMENSIONS
POWER REQUIREMENTS