NEC 4200W - Manual (Page 30)

25
Information
Ⅵ
Screen modes
FULL* ................. The image is displayed over the
entire screen. Set this mode for wide
images. (16 : 9)
An 800
ן600 input signal is con-
verted to an 800
ן480 signal.
NORMAL* .......... Set this mode for the same size as
normal VIDEO pictures (4:3).
An 800
ן600 input signal is con-
verted to a 640
ן480 signal.
* For compatibility set Table for Signals Supported on
page 36.
Adjusting the position of the computer image
V-POSITION .......
Adjusts the vertical position of the
image.
H-POSITION ...... Adjusts the horizontal position of
the image.
FINE PICTURE .. Adjusts for flickering.
PICTURE ADJ. ... Adjusts for striped patterns on the
image.
Ⅵ
Restoring the factory default settings
Select “RESET” under the function menu. Note that this
also restores other settings to the factory defaults.