NCT Group i30sx User Manual
Page 144
136
nextel.com
3
Remove the keypad from the phone (or from the faceplate).
4
To replace the faceplate and keypad, lay the keypad on the phone body.
5
As shown in the illustration, attach the faceplate to the phone body, first
at the top and then at the bottom. The top of the faceplate needs to be
securely seated into the top of the phone. Rotate faceplate towards
bottom of the phone until the lower snaps are engaged. Snap
engagement will be verified by a clicking sound. After the lower snaps
are engaged, verify that the middle of the faceplate is engaged by
pressing the faceplate near the s and r keys. This will be verified by
a clicking sound.
6
Re-apply power to the phone by pressing and holding p near the
bottom of the phone until the status light glows red and a tone briefly
sounds.