Navigon 2000S - Manual (Page 30)

Getting Started
Installing the Car Mount
14 NAVIGON 2000S | 2200T Series User’s Guide September 2008
NAVIGON, INC.
Powering the navigation device
Included with the NAVIGON device is a car charger cable with which power can be
supplied to the navigation device using the vehicle's cigarette lighter.
The car charger cable is connected to the NAVIGON device using the power connec-
tion port (Power) on the bottom of the device.
Using the Screensaver
In the M AIN W INDOW :
1. Tap Options > Settings > General.
The G ENERAL O PTIONS P AGE 1 displays.
2. On P AGE 3, in the Screensaver field, tap Yes.
3. Tap OK to save the change.
Selecting Day/Night Viewing Mode
In the M AIN W INDOW :
1. Tap Options > Settings > General.
On G ENERAL P AGE O NE :
2. In the Display mode field, set the viewing mode. Options are:
Automatic Automatically switch between day and night display, based on
sunrise and sunset times.
Night Display with darker colors for night viewing.
Day Display normally for daytime use.
3. When finished, tap OK to return to P AGE O NE .
4. Tap OK to save changes.
Caution! The car charger cable is to be connected to cigarette lighters with an operat-
ing voltage of 12V only.
Note: When enabled, the screensaver displays a slide show of pictures when you have
not touched the device after an extended period of inactivity.
Note: The screensaver is automatically disabled during navigation.
Note: Change day and night brightness levels in the Brightness Day and the
Brightness Night fields.