Nady Systems SPM 6600/8600 - Manual (Page 11)

CONTROLS AND CONNECTIONS
11
40) AC VOLTAGE SELECTOR SWITCH
Before plugging in the power cord, check to see that the unit is set
for the proper voltage for your area: ~115V (60Hz) or ~230V
7. SPEAKER CONNECTION EXAMPLES
The following speaker connections can be used for STEREO or MONITOR MAIN operations. Both RIGHT/MONITOR jacks are
paralleled together and LEFT/MAIN jacks are paralleled together.
MIN. 8 Ω MIN. 8 Ω
MIN. 4 Ω TOTAL
MIN. 8 Ω MIN. 8 Ω
MIN. 4 Ω TOTAL
MIN. 4 Ω TOTAL MIN. 4 Ω TOTAL
BRIDGE CONNECTION
Connecting a single speaker to the BRIDGE jack. (Unit should be set to BRIDGE MODE).
MIN. 4 Ω TOTAL
(37)
(38)
(39)
(41)
(40)
(50Hz)
41) POWER ON/OFF SWITCH
To turn the unit ON press the button in, to turn the unit OFF
repress the button out.