Newcon Optik SPOTTING SCOPE 15-45X60 - Manual (Page 5)

3
4. OPERATION INSTRUCTIONS
Set Up and Mounting
1) Spread the tripod legs (A) and set the tripod on a firm support.
Loosen the adjustment screw (H) to place mounting platform
(C) in horizontal position, then rotate the screw to lock
mounting platform.
2) Position mounting shoe (D) of the spotting scope body on the
platform (C) then tighten mounting screw (E) to firmly lock
spotting scope body on the platform.
3) Remove protective lens cap (F) on the objective (G) lens.
5. STARTING OBSERVATION
Usage with Fixed Power Eyepiece
1. Loosen the adjustment screw (H) and point your scope
objective lens to the target you want to view.
2. Adjust the focus knob (K) until you get the clear image from
your eyepiece lens.
Usage with zoom eyepiece
1. Loosen the adjustment screw (H) and point your scope
objective lens to the target you want to view.
2. Rotate the zoom ring (L) of the eyepiece to the lowest
magnification.
3. Adjust the focus knob (K) until you get the clear image from
your eyepiece lens.
4. Rotate the zoom ring (L) to the desired magnification and re-
focus with focus knob (K) if necessary.